OAH50 ALTERNATIVE TO ARCOL/OHMITE HS50 SERIES

Aluminium Housed Resistors OAH Series
Spec Sheet

Email sales@bec.co.uk or call +44 (0) 845 4900 40 for pricing and more information

SKU: OAH50 Category:

Description

High quality ceramic rods are firmly pressed with nickel plated caps pre-welded with tin coated copper wires, on the rods. Resistive wire is wounded and spot welded at both ends on caps. The resistor are coated with silicon epoxy and resistor is molded in aluminium casing for electrical, mechanical and climatic protection, alpha numeric marking is applied with respect to designated value on resistor.

FEATURES:
Wide resistance range and power.
Low Inductance.
Pulse withstanding design available

PERFORMANCE CHARACTERISTIC:
Tolerance: ±0.25% to ±5%
Short Term Overload (10 x Rated power – 5 Sec): Delta R ± (0.5% +0.05 Ohms)
Load Life (Rated 1000 Hrs 1.5/0.5 Hr ON/OFF): Delta R ± (1.0% +0.05 Ohms)
Temperature Coefficient Resistance (TCR): ± 60 ppm/°C up to 100W, ± 30 ppm/°C below 100W
Operating Temperature: -25 to +250°C
Insulation Resistance (at 500V for 1 Min): > 10 000 M Ohms
Incomustibility (16 x rated voltage – 5 sec): No Flash
Solderability (Solder bath dip – 5 Sec): > 95% Coverage
Vibration 10Hz to 2000Hz , 1g, 6 hrs, x & y axis: Delta R ± (0.2% +0.05 Ohms)
Shock 30G, 6ms, 3 times, x,y,z axis: Delta R ± (0.2% +0.05 Ohms)
Resistance to Solvents (Solvent dip – 3 min): No deterioration

Reviews

There are no reviews yet.

Be the first to review “OAH50 ALTERNATIVE TO ARCOL/OHMITE HS50 SERIES”

Your email address will not be published.